WFP Select filter for the Quadro 60 (set of 4 pieces)
Carbonit WFP select replacement filter for the Quadro 60.
The Carbonit WFP Select filter cartridge is a sintered activated carbon block filter with special dimensions. It can be used only in Carbonit QUADRO 60 filter systems. This sinteredactivatedcarbon block filter focused on the chemical and physical removal and simple mechanical particle removal of unwanted components in drinking water. There is no bacteriological barrier sought through the finest filter pores, because you want to work with large amounts of water in a short time. The filter cartridges need to be changed (according to DIN 1988) at 6 months. Basically, 10,000 liters of water must be filtered within 6 months. However, an earlier change may be necessary if the water flow is noticeably reduced. Earlier replacement is no defect of the water filters used, but a sign of the increased presence of fine particles in the unfiltered water.
For filter change QUADRO always 4 pieces Carbonit WFP Select filter cartridges required!
Product specifications
Additional information
| Filter fineness of the Carbonit WFP Select filter cartridge | 10 microns |
|---|---|
| Weight | about 850 g (700 g without packaging) |
| Filtration | 10 microns (10,000 nm) |
| Flow rate | about 22 liters / min |
| Lifetime | 10,000 liters |
| Replace filter by | no later than 6 months |
| Recommended for | Carbonit QUADRO 60 |
Carbonit WFP select replacement filter for the Quadro 60. All four filters in the Quadro 60 should be replaced every six months. The product consists of a set of 4 filters.
€208,00
- Ordered before 7 p.m. shipped today!
- Free shipping from € 60,= (NL / BE / DE)
- Return within 14 days
Other customers' opinions on WFP Select filter for the Quadro 60 (set of 4 pieces)
Already familiar with our great pride?
